Message Boards

Message Boards (
-   Steamboats & History (
-   -   Picture of the Week (

Alan Bates 11-05-2006 09:37 AM

Picture of the Week
Seeing those bells touches a tender spot. We used them for several years when I was on the Belle. Later, some ornery engineer cut the lines from the pilothouse and was about to chuck the bells. Mike Fitzgerald (may his shadow never grow less) saved the day and the bells. Later still, Bill Ray reconnected them, hoping this unique system could again be used. It didn't work out. The present-day engineers do not trust themselves to readily recognize the signals. The stopping bell has some sort of hitch in its gitalong. The pilots also lack this faith. All-in-all it is a sad story.
Anyone who has ever used a spreadsheet or studied basic computer programming can readily understand the system. It is a simple IF-THEN, GO-TO. If the engines are running and a bell rings, then goto the approriate speed or direction. If the engines are not running and a bell rings, then goto the appropriate speed or direction.
Once learned, the bell system is a fast and efficient means of communication. It frees the engineer from handling the telegraph. It can be heard all over the boat, so the engineer is not obliged to stay within earshot of the faint tinkle of the telegraph.
It is sad to lose this picturesque and historic means of communication when two hours of practice could make it work.

Frank X. Prudent 11-05-2006 12:52 PM

Dad would often say that, "Some (pilots) couldn't make anymore noise (than them ringing bells) if you gave 'em a tin pan full of marbles!"

Alan Bates 11-05-2006 02:45 PM

It was a pleasure to ring them to your dad, Frank.

Alan Bates 11-05-2006 02:49 PM

It is an old joke, but it is funny. A pilot walks through the engineroom after the boat is landed. There is the engineer, shipping up, moving the throttle, shipping up again - all at a furious pace. The pilot asks, "What are you doing, Chief?" The chief responds, "You rang so many bells getting in here it's gonna take me two hours to catch up!"
My apologies.

All times are GMT -5. The time now is 01:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2
All content on this site is copyright protected and may not be re-used without written permission.